|
New
8 Channel Controller |
|
Accuracy |
± 0.5 °C (-10 to 85 °C)
± 1.0 °C (-55 to -10 °C and 85
to 125 °C) |
|
Display |
2 LED 4 digits (red or green)
|
|
Supply voltage |
24V DC ; 220V AC
50/60Hz |
|
Operating temperature |
0 ÷ +50 °C |
|
Degree of protection |
IP60 / IP20
front / rear panel |
|
Size |
48x48x95, 48x48x102 mm |
|
|
|
|
SM723 may be equipped with up to 8 digital temperature sensors.
Controller display consecutively temperature by channels and
user can set specific channel to be displayed permanently. RS485
network is used to transfer measured values to storage system
via 8 independent network addresses. SM723 is closed in plastic case with own steadying pins
and size according to DIN 48õ48 mm.
|
|
User Manual
SM723 |
|
|
|
|
Dual Channel
|
|
Range |
|
|
RTD Pt100 |
-20.0 ÷ 350.0 °C |
|
TC J (FeConst) |
0 ÷ 900 °C |
|
TC K (NiCrNi) |
0 ÷ 1200 °C |
|
Accuracy |
± 0.25 % of the range
± 1 digit |
|
Outputs |
2 x 5A (NO+NC) or 24V/dc SSR |
|
Display |
2 LED 4 digits (red or green)
|
|
Supply voltage |
12V DC ; 24V DC ; 220V AC
50/60Hz |
|
Operating temperature |
0 ÷ +50 °C |
|
Degree of protection |
IP60 / IP20
front / rear panel |
|
Size |
48x48x95, 48x48x102 mm |
|
|
SM941 may be equipped with two types of displays: 0,28” or 0,36” (red
or green). It is closed in plastic case with own steadying pins
and size according to DIN 48õ48 mm.
|
Data Sheet
SM941 |
User Manual
SM941 |
|
|
|
|
Dual Channel |
|
Range |
|
|
RTD Pt100 |
-20.0 ÷ 350.0 °C |
|
TC J (FeConst) |
0 ÷ 900 °C |
|
TC K (NiCrNi) |
0 ÷ 1200 °C |
|
Accuracy |
± 0.25 % of the range
± 1 digit |
|
Outputs |
2 x 5A (NO+NC) or 24V/dc SSR |
|
Display |
2 LED 4 digits (red or green)
|
|
Supply voltage |
12V DC ; 24V DC ; 220V AC
50/60Hz |
|
Operating temperature |
0 ÷ +50 °C |
|
Degree of protection |
IP60 / IP20
front / rear panel |
|
Size |
96x96x87, 96x96x94 mm |
|
|
|
|
SM981 is equipped with two 0,80” displays.
It is closed in plastic case with own steadying pins
and size according to DIN 96õ96 mm.
|
|
User Manual
SM981 |
|
|
|
|
Dual Channel + Timer |
|
Range |
|
|
RTD Pt100 |
-20.0 ÷ 350.0 °C |
|
TC J (FeConst) |
0 ÷ 900 °C |
|
TC K (NiCrNi) |
0 ÷ 1200 °C |
|
Accuracy |
± 0.25 % of the range
± 1 digit |
|
Outputs |
2 x 5A (NO+NC) or 24V/dc SSR |
|
Display |
2 LED 4 digits (red or green)
|
|
Supply voltage |
12V DC ; 24V DC ; 220V AC
50/60Hz |
|
Operating temperature |
0 ÷ +50 °C |
|
Degree of protection |
IP60 / IP20
front / rear panel |
|
Size |
96x96x87, 96x96x94 mm |
|
|
|
|
SM982 is multi-functional dual-channel programmable temperature controller with integrated timer and speaker.
It has two equal inputs which can work with thermo resistors Pt100 and thermocouples J and K type – isolated by their case.
SM982 works with ON-OFF outputs for both channels. Timer starts after first reaching of given temperatures in both channels
and the regulation starts too. After expiration of the timer outputs (heating) are switched OFF and Alarm Speaker is switched ON.
Process can be restarted manually. One relay or SSR output is provided for each channel.
|
|
User Manual
SM982 |
|
|
|
|
Dual Channel with
2 Timers & 3 Outputs |
|
Range |
|
|
RTD Pt100 |
-20.0 ÷ 350.0 °C |
|
TC J (FeConst) |
0 ÷ 900 °C |
|
TC K (NiCrNi) |
0 ÷ 1200 °C |
|
Accuracy |
± 0.25 % of the range
± 1 digit |
|
Outputs |
2 x 5A (NO+NC) or 24V/dc SSR |
|
Display |
2 LED 4 digits (red or green)
|
|
Supply voltage |
12V DC ; 24V DC ; 220V AC
50/60Hz |
|
Operating temperature |
0 ÷ +50 °C |
|
Degree of protection |
IP60 / IP20
front / rear panel |
|
Size |
96x96x87, 96x96x94 mm |
|
|
|
|
SM983 is multi-functional dual-channel programmable temperature controller with
two integrated timers.
It has two equal inputs which can work with thermo resistors Pt100 and thermocouples J and K type – isolated by their case.
SM983 works with ON-OFF outputs for both channels.
|
|
User Manual
SM983 |
|
|
|
|
New Single Channel
Module
Multi-point System |
|
Type |
SM 987 SE
RS485 & NPN PID Out |
|
Range |
|
|
RTD Pt100 |
-20.0 ÷ 350.0 °C |
|
TC J (FeConst) |
0 ÷ 900 °C |
|
TC K (NiCrNi) |
0 ÷ 1200 °C |
|
DC Current 4 ÷ 20 mA |
0 ÷ 9999 |
|
Accuracy |
± 0.25 % of the range
± 1 digit |
|
Output |
Transistor NPN 36V 250mA PID |
|
Supply voltage |
12 ÷ 24V DC |
|
Operating temperature |
0 ÷ +50 °C |
|
Degree of protection |
IP20 |
|
|
|
|
SM987SE is temperature control unit designed to measure, control and
record temperature values as a part of multipoint RS485 network.
It is working with Pt100, J & K termocouplers or 4-20mA
current inputs. Sensor and power supply are fully isolated by
each other. RS485 network adress is set up by coder in front of
the device. Load controlling is performed by one open collector PID output.
Part of the system is PC software VIEWsm987 with set up,
display and archive functionality. SM987SE module is supplied in
DIN mountable plastic case.
|
User Manual
TEMP 24 |
User Manual
SM987SE |
| |
|
|
