|
New Eccentric Press
Controller
|
|
Inputs |
3 digital
12 ÷ 30 VDC NPN |
|
Output |
1 x 5A (NO+NC) or 24V/dc SSR
1 x 3A / 100V transistor |
|
Display |
LED 5 digits (red or green)
|
|
Supply voltage |
24V DC ; 220V AC
50/60Hz |
|
Operating temperature |
0 ÷ +50 °C |
|
Degree of protection |
IP60 / IP20
front / rear panel |
|
Size |
48x48x95, 48x48x102 mm |
|
|
SM332 is designed to provide clutch control of eccentric press
and counting its strikes. Cycle time can be set up to prevent
unwanted strike of press if upper death point sensor is faulty.
Counter displays number of strikes and can easy reset just
pressing button combination. |
|
User Manual
SM332 |
|
|
|
|
New
Injection Press
Controller
|
|
Output |
2 x 3A/250V(NO) & 1x 5A/250V (NO) |
|
Display |
2 x LED 4 digits (red or green)
|
|
Supply voltage |
24V DC ; 220V AC
50/60Hz |
|
Operating temperature |
0 ÷ +50 °C |
|
Degree of protection |
IP60 / IP20
front / rear panel |
|
Size |
48x48x95, 48x48x102 mm |
|
|
SM343 is programmable controller for injection press with air take out of mould.
Controller can be set up to work in manual or automatic mode.
SM343 stores up to 24 preset settings in FLASH memory which can be easily selected. |
|
User Manual
SM343 |
|
|
|
|
New Over-Current
Protection Controller
|
|
Output |
5A (NO+NC) or 24V/dc SSR |
|
Display |
LED 4 digits (red or green)
|
|
Supply voltage |
12V DC ; 24V DC ; 220V AC
50/60Hz |
|
Operating temperature |
0 ÷ +50 °C |
|
Degree of protection |
IP60 / IP20
front / rear panel |
|
Size |
48x48x95, 48x48x102 mm |
|
|
SM 831 is programmable controller for measurement and control of AC current. Controller works without current
transformer in the range 0.25A to 5A. Programmable parameters include working range and output reaction time.
SM831 output work with ON-OFF rule. |
|
User Manual
SM831 |
|
|
|
|
New Programmable
Voltmeter
|
|
Input |
DC voltage |
|
SM832-A/B-x-x-x-x |
range - 0.1 ÷ 35V |
|
SM832-C-x-x-x-x |
range - 8.0 ÷ 35V |
|
Output |
5A (NO+NC) or 24V/dc SSR |
|
Display |
LED 4 digits (red or green)
|
|
Supply voltage |
8÷35V DC ; 85÷265V AC 50÷60Hz
220V AC
50/60Hz |
|
Operating temperature |
0 ÷ +50 °C |
|
Degree of protection |
IP60 / IP20
front / rear panel |
|
Size |
48x48x95, 48x48x102 mm |
|
|
SM832 is programmable controller for measurement and control of DC voltage.
Controller can measure its own supply voltage or use separate voltage input.
Output is turned off when input voltage is below low limit ot over high limit.
SM832 is closed in plastic case with size according to DIN 48х48
mm. |
|
User Manual
SM832 |
|
|
|
|
New
Servo controller
|
|
Inputs |
|
|
In 1 - In 5 |
Digital 12 ÷ 30 VDC NPN |
|
In 6 - In 7 |
Digital 12 ÷ 30 VDC NPN
for A & B signals of incremental sensor |
|
Outputs |
|
|
Relay |
2 х 5А (NO) / 250V AC |
|
Analog |
PWM - two-way optical isolated |
|
Display |
2 LED 4 digits (red or green)
|
|
Supply voltage |
24V DC (about
100 mA) |
|
Operating temperature |
0 ÷ +50 °C |
|
Degree of protection |
IP60 / IP20
front / rear panel |
|
|
Servo controller SM851E is designed to control lifting machines with path feedback witch is provided by
incremental sensor (360 impulses per rotation) with 2 impulse series A & B.
SM851E is equiped with 7 digital optical isolated inputs and 2 relay outputs and PWM output. |
|
User Manual
SM851E |
|
|
|
|
New
Programmable
Controller
|
|
Inputs |
|
|
In 1 - In 4 |
Digital 12 ÷ 30 VDC NPN |
|
In 5 - In 7 |
Digital 12 ÷ 30 VDC NPN
for A, B & Z signals of incremental sensor |
|
Outputs |
7 х 50 Vdc / 0.5 A
Transistor NPN - open collector |
|
Display |
2 x LED 4 digits (red or green)
|
|
Supply voltage |
24V DC (about
100 mA) |
|
Operating temperature |
0 ÷ +50 °C |
|
Degree of protection |
IP60 / IP20
front / rear panel |
|
|
SM852E is designed to control technological processes with cyclic recurrence activity in funtion of angle of rotation.
Path feedback is providev with incremental sensor woth 2 x 360 impulse series A & B and zero marker Z generated for every cycle. |
|
User Manual
SM852E |
|
|
|
|
New
Start Controller
|
|
Inputs |
5 digital 12 ÷ 30 VDC NPN |
|
Outputs |
|
|
Out 1 & 2 |
Relay 5А (NO+NC) |
|
Out 3 |
PWM - two-way optical isolated |
|
Display |
2 x LED 4 digits (red or green) |
|
Supply voltage |
24V DC (about
100 mA) |
|
Operating temperature |
0 ÷ +50 °C |
|
Degree of protection |
IP60 / IP20
front / rear panel |
|
|
SM852E is designed to control start process of asynchronous electric motor powered by PWM driver.
It has 5 digital inpurt - 1 for ready state and 4 for customer commands. Relay outputs set "ON" and "REVERSE"
commands to PWM driver and in addition PWM open collector output set the frequency.
There is parametric value for
acceleration, speed, timers and control values. |
|
User Manual
SM853E |
|
|
|
|
New
Level Controller
|
|
Inputs |
3 digital 8 ÷ 15 VAC |
|
Outputs |
3 x 5A (NO+NC) Relay |
|
Display |
3 output status LEDs |
|
Supply voltage |
220V AC 50/60Hz |
|
Operating temperature |
0 ÷ +50 °C |
|
Degree of protection |
IP60 / IP20
front / rear panel |
|
|
SM861E is designed to control conductive liquid fluid tank level. The unit monitor 3 mounted in the tank sensors
to detect low, normal and high level. Measuring system uses AC voltage to avoid fluid polarization.
SM861E use 3 outputs to fill or drain the tank and to display an alarm when the level is below low limit. |
|
User Manual
SM861E |
|
|
|
|
New
Level Controller
|
|
Inputs |
3 digital 8 ÷ 15 VAC |
|
Supply voltage |
220V AC 50/60Hz |
|
Operating temperature |
0 ÷ +50 °C |
|
Degree of protection |
IP60 / IP20
front / rear panel |
|
|
SM862E is designed to control conductive liquid fluid tank level. The unit monitor 3 mounted in the tank sensors
to detect low, normal and high level. Measuring system uses AC voltage to avoid fluid polarization.
SM862E use one outputs to control fluid level. |
|
User Manual
SM862E |
|
|
|
|
New
Voltmeter
|
|
Inputs |
Voltage 25 ÷ 220 V AC |
|
Outputs |
2 x 5A (NO+NC) Relay |
|
Accuracy |
± 0.25 % of the range
± 1 digit |
|
Display |
2 x LED 4 digits (red or green)
|
|
Supply voltage |
220V AC 50/60Hz |
|
Operating temperature |
0 ÷ +50 °C |
|
Degree of protection |
IP60 / IP20
front / rear panel |
|
Size |
96x96x87, 96x96x94 mm |
|
|
SM876 is designet to measure and controll AC voltage via tranformet with output voltage 100V. Coeficien of transformation can be set up like parameter.
This give the ability to measure arbitrarily high voltage. |
|
User Manual
SM876 |
|
|
|
